Marine Ropes 6x19 Safe Operation

Marine ropes 6x19 safe operation, on the external appearance of the brake wheel, the new replacement of the brake belt, the required touch belt and the brake wheel touch surface is not less than the brake belt area, marine ropes 6x19 method. When the brake is pressed, the marine ropes 6x19 taxi interval of the elevator is calculated according to the running speed. When the DC electromagnetic brake is released, the marine ropes 6x19 is connected to the coil circuit through the normally closed contact of the touch device, so that the temperature rise is lowered, the pin of the brake can be freely moved, and the thin oil can be used for lubrication. The shaft, the lever system and the spring are found to be replaced in time.

Marine ropes 6x19's safe operation, can support the marine ropes 6x19 iron core sliding in the copper sleeve sensitive, if necessary, can be lubricated with graphite powder. In order to ensure that the upper and lower ends of the brake shoe are evenly spaced from the brake wheel and the force applied on the entire touch surface is uniform, the brake base must be adjusted with the gasket so that the brake shoe and the brake wheel center line are level and reach the center height. And straightness requirements. Pay attention to whether the foot bolt is rolling, whether the gasket is displaced, check the reliability of the loose brake device, the marine ropes 6x19 method is the same as the adjustment method, check the gap between the two marine ropes 6x19 iron core, measure the bolt in the marine ropes 6x19 The different lengths can be loosened and braked. The marine ropes 6x19 brake wheel should be free of scratched high-temperature coking particles, otherwise it should be ground and lubricated.