The hoist rope 6x25fi is simple to manufacture

The hoist rope 6x25fi is simple to manufacture and easy to use, but its stress is not good. It is mostly used in work spaces with a lifting capacity of 80 tons or less. When the lifting weight is large, the double hooks with symmetrical force are often used. The laminated hoist rope 6x25fi is riveted from several pieces of cut-formed steel plate. When the individual plates are cracked, the whole hoist rope 6x25fi will not be damaged, and the safety is better, but the self-weight is large, mostly used for lifting weight or lifting steel. On the crane of the barrel. The hoist rope 6x25fi is often subjected to impact during operation and must be made of high-quality carbon steel with good toughness.

The hoist rope 6x25fi is unique, novel, high quality and safe. It is suitable for factories, mines, petroleum, chemical and ship terminals. Ensure safety, quality safety factor, static load up to 3 times. The lifting capacity ranges from 5 tons to 150 tons.

hoist rope 6x25fi human safety inspection, hoist rope 6x25fi for human-powered hoisting mechanism, tested with 1.5 times rated load as inspection load. The hoist rope 6x25fi for the power-driven hoisting mechanism was tested with 2 times the rated load as the test load. The hoist rope 6x25fi should not have any obvious defects and deformations after the test load is removed. The increase of the opening degree should not exceed 0.25% of the original size. Qualified hoist rope 6x25fi should be printed in the low stress area of hoist rope 6x25fi, including rated lifting weight, factory or factory name, inspection mark, production number, etc.